Used 65mm Zhangjiagang Sevenstars Machinery SJ65/38 Single Screw HDPE Pipe Extrusion Line
Additional information
| Vacuum Feeder | – |
|---|---|
| Brand | Zhangjiagang Sevenstars Machinery |
| Feeder Model | ZJ400 |
| Motor | 3 HP |
| Hopper Volume | 15L |
| Hopper Dryer | – |
| Hopper Dryer Model | STG-U315 |
| Volume | 1000 L |
| Charge Capacity | 500 kg |
| Fan Motor Power | 1 HP |
| Heater Power | 24 HP |
| Voltage | 480V / 60 Hz |
| Extruder 1 | – |
| Model | SJ65/38 |
| Screw Diameter | 65mm |
| L/D | 38:1 |
| Screw Heating Zones | 5 |
| Barrel Cooling Zones | 5 |
| Main Motor | 120 HP AC Motor |
| Co-Extruder | – |
| Co-Extruder Model | SJ25/25 |
| Co-Extruder Screw Diameter | 25mm |
| Co-Extruder L/D | 25:1 |
| Heating Zones | 2 |
| Co-Extruder Motor | 2 HP |
| Temperature Controller | RKC/Omron |
| Calibrater | – |
| Length of Chamber | 9000mm |
| Cooling Type | Forced Spray |
| Vacuum Pump | (2 sets) 5 HP |
| Water Cooling Chamber | – |
| Set | 2 sets |
| Water Chamber Length | 6000 mm |
| Cooling Mode | Spray-pouring |
| Water Pump | 5 HP (1 set) |
| Haul Off | – |
| Pedrail Length | 1500 mm |
| Width of Pedrail Claws | 55 mm |
| Hauling Motor | 1.7 HP (3 sets) Servo Motor |
| Laser Printer | – |
| Rated Power | 30 W |
| Wave length | 355 nm |
| Marking Line Width | 0.01 – 0.2 mm |
| Cutter | – |
| Cutting Diameter | 2-6 inch |
| Max Cutting Wall Thickness | 25mm |
| Cutting Motor | 3 HP |
| Disk Pipe Winder | – |
| Pipe Diameter | 2-4 inch |
| Inner Diameter | 550-1500 mm |
| Outer Diameter | < 3500 mm |
| Pipe Stacker | – |
| Discharge | Pneumatic |
| Pipe Stacker Length | 6000 mm |
| Spare Parts | – |
| Thermocouple | 5 sets |
| Rubber Block | 15 sets |
| Seal | 10m |
| Spray Nozzle | 20 Sets |
| Heating Chamber | 2 sets |
| Small Circuit breaker | 2 Sets |
| Extruder Screw Unload Tools | 1 set |
Request A Quote
otPlastiWin Capital Equipment, LLC. has just located this Used 65mm Zhangjiagang Sevenstars Machinery SJ65/38 Single Screw HDPE Pipe Extrusion Line for sale. It comes complete and ready for a new home. It is priced to sell so call us today at (330) 998-6738 to set up your inspection or for any other Extrusion needs!
With more than 35 years combined experience, PlastiWin Capital Equipment is dedicated to providing quality used plastic process equipment, outstanding service and competitive prices to meet the needs of all used processing equipment industries.
We are the top source for used injection molding equipment, used rotational molding machines, used thermoforming machine, plastic extruders and used blow molding machines. Some of our most popular brands include Davis Standard, Erema, Nissei, Conair, Milacron, and many more!